Next Generation Air & Heat, Inc. Blog: Posts Tagged ‘Cape Canaveral’

Cape Canaveral Air Conditioning Repair Question: Why is My Central Air Conditioner Making Noise?

Wednesday, March 21st, 2012

A good air conditioner is a life saver in the midst of hot and sticky weather in Cape Canaveral, but just because the system makes you comfortable and makes the hottest months bearable doesn’t mean you want to hear it clanging and banging all summer. If you notice excess noise coming from your air conditioner, it might be a problem that can be fixed by your technician. Here are some common causes of excess noise from an air conditioner and what you can do to fix them.

Blower – The blower is a motor and fan blade assembly. If the blade touches the housing or if the motor needs a tune up, it might start to make excess noise. Loose screws, foreign objects, or a need for oiling or new parts will all cause noise problems but they are all easy fixes.
Ductwork – If the sounds you’re hearing are in the ductwork or vents, it may be due to expansion and contraction in your ventilation system. This is normal and while it may be obnoxious, it tends not to persist during the hottest months as temperature won’t fluctuate as much.
Bubbling Sounds – If you hear a gurgly or bubbly noise coming from your indoor unit, it may be due to a blockage in the condensate line. The easiest solution is to clean the condensate line and check for any clogs or blockages in the system.
Clicking Sounds – If you hear a clicking sound, it is likely from the relay or contactor in the system. If this is the case, have a Cape Canaveral professional check it right away. Electrical problems are not to be taken lightly where your air conditioner is concerned.
Foreign Objects – Sometimes, the condenser fan will make a lot of loud noise because foreign objects get stuck in there. Sticks, leaves, toys, food from small animals – it can all get stuck in the fans and make a tremendous amount of noise. Keep the area around your condenser unit clear of debris and check it often if you hear loud noises.

Most noises from your Cape Canaveral central air conditioning unit are explainable and can be fixed relatively easily. If you cannot find the source of the noise, however, and it is only getting worse, call Next Generation Air & Heat before the problem grows.

Tags: Air Conditioning, Air Conditioning Repair, Cape Canaveral, Port St John, Valkaria
Posted in Services | Comments Off on Cape Canaveral Air Conditioning Repair Question: Why is My Central Air Conditioner Making Noise?

Air Conditioning Tip: Why it Is Important to Examine Your Ducts Before Installation

Wednesday, March 14th, 2012

For most Orlando homeowners the day a new air conditioner gets installed is a great one. It means you can look forward to plenty of days of cool comfort, sheltered from the blistering summer heat that would otherwise make you feel sticky and sluggish.

Before that installation can take place, however, there are many smaller tasks that must be performed. You have to do some research, shop around, consult with a contractor and finally decide on the best system for your home. Finally, you should have your ducts examined.

Your ducts are the pathway by which cooled air will be distributed through your home. Without regular maintenance, ducts are less efficient in transferring air and can cost you money, not only in electricity but in air quality control. Like any major component of your HVAC system, they need to be properly maintained to work properly.

So, you want your ducts to be in tip top shape for your new AC system. Having a professional inspect them thoroughly prior to installation will identify any damage, dirt, debris, leaks, corrosion or other trouble spots that could impede your air conditioning.

This gives you the opportunity to get any of those problems fixed before the new system is installed. Plus, a professional inspection is an important part of routine duct maintenance anyway. Having it done at this juncture is easier and ensures you know will have a smooth running air conditioner for some time to come.

Having duct work in good repair is vital to the operation of your HVAC system, including the new Orlando AC system you want to install. If you are contemplating having a new air conditioning system installed or even if you are not, now is the time to call Next Generation Air & Heat for full inspection of your ductwork. Especially if you have a forced air heating system and those ducts are used year round, you want to know for a fact that they will work properly in the future, no matter what is hooked up to them.

Tags: Air Conditioning, Air Conditioning Installation, Cape Canaveral, Duct Repair, Orange County, Orlando, Titusville
Posted in Services | Comments Off on Air Conditioning Tip: Why it Is Important to Examine Your Ducts Before Installation

Heat Pump Repair Guide: How to Handle Your Finicky Heat Pump

Wednesday, February 8th, 2012

A heat pump is designed to keep your Cape Canaveral comfortable. Warm weather, cold weather – it doesn’t matter. It should turn on when you need it and turn off when you don’t. So, when the device starts turning on and off without reason or when you need it to stay on, what exactly is the problem and how can you fix that problem without losing the heating or cooling capacity of your device.

Common Causes of the Problem

There are a number of reasons why your heat pump would turn off shortly after turning on, and most of the time this occurs in heating mode. If it occurs in cooling mode, you should have the device inspected immediately because there is likely something wrong with a core component like the compressor. For heating mode issues, here are some common problems:

Dirty Coils – If the coils are dirty, the device won’t be able to properly operate, especially if it has been some time since the last cleaning. Both sets of coils need to be cleaned at least once a year to avoid this becoming a problem.
Low Refrigerant Charge – If the refrigerant gets low, you’ll need to have it recharged because the pressure in the device will drop and it will therefore turn off after a few minutes of use.
Defrost Timer – If the defrost timer is forcing the device into a defrost cycle too often (usually it is set to 30, 60, or 90 minutes), the fan might turn off every few minutes after turning on. This is a common problem and is usually due to a thermostat or switch issue which can be fixed relatively easily.

Another thing to ask yourself when this problem occurs is whether the device is heating properly when on. Defrost timer issues don’t usually impinge on the heating ability of the device, while low refrigerant can. You want to make sure the device is working properly when on and not just cycling on and off without heating capacity.

Based on what you find, you’ll need a technician to take a closer look and ensure everything is working properly. Most repairs for this type of problem are relatively simple.

Tags: Cape Canaveral, Grant, Heat Pump Repair, Heat Pumps, Indian River County, Windermere
Posted in Services | Comments Off on Heat Pump Repair Guide: How to Handle Your Finicky Heat Pump

Vero Beach Furnace Repair Question: What Causes Cracks in a Heat Exchanger?

Friday, February 3rd, 2012

Furnaces are designed so that the heat – and the combustion byproduct produced inside – doesn’t interact directly with the outside air. This design is to ensure you have a safer furnace in your Vero Beach home that won’t inadvertently affect your family’s health.

The metal piece that separates the furnace heat from the outside air stream is called the heat exchanger. The heat exchanger performs a very important function, and if it is broken or cracked, it can’t work properly.

A cracked heat exchanger is very common problem with heating systems, as well as one that should be repaired as soon as possible. But what causes a heat exchanger to crack? Here are some of the most common reasons:

A long period of normal use. A furnace heat exchanger naturally expands and contracts with the heat of the furnace, over and over again as the furnace is turned off and on to heat the home. Over several years, this stress can crack the metal.
Poor air flow, often caused by dirty or obstructed vents, can result in poor air flow through the furnace. This overworks the furnace, which can crack the heat exchanger prematurely.
Poor, incomplete or improper combustion can also cause a heat exchanger to crack. When the combustion process is less efficient – which can also be a result of poor air flow — your furnace’s burners have to run hotter and longer to heat your home, which means extra stress on the heat exchanger.

Essentially, if a furnace is running at less than optimal efficiency for an extended period of time, the heat exchanger is put under additional stress beyond the usual and can crack prematurely. Therefore, the best way to prevent a cracked heat exchanger is proper maintenance, particularly keeping all vents clean and unobstructed and getting an annual maintenance inspection.

If your heat exchanger does crack, do not hesitate to call a professional and get it repaired. The crack can allow potentially dangerous combustion gases to seep into your home, which can have a negative impact on your family’s health.

Tags: Brevard County, Cape Canaveral, Furnace Repair, Heat Exchanger, Heating Repair, Orlando, Vero Beach
Posted in Services | Comments Off on Vero Beach Furnace Repair Question: What Causes Cracks in a Heat Exchanger?

HVAC Contractor Tip: How to Replace a Thermostat

Friday, January 13th, 2012

There are a lot of common household tasks that Cape Canaveral do-it-yourselfers can handle beyond changing light bulbs or replacing a fuse. One of those is changing out a thermostat. The reasons for replacing a thermostat can vary from making an upgrade to changing out a thermostat that is not working right – or at all. Whatever the reason, the task is pretty simple and require s very little time and very few tools.

Let’s set the stage.

The materials you will need are the replacement thermostat, wire connectors, electrical tape (optional), needle nose pliers, and a screwdriver.

Here are the steps:

Turn off electrical power to the existing thermostat. You can do this by flipping a breaker switch or removing a fuse from your home’s electrical panel. This would be a good time to make a note of the circuit’s location, writing the circuit number on the panel door or using a sticker.
Remove the cover from the existing unit. You should be able to locate the screws that hold it to the wall mounting plate. Remove the screws and pull the unit away from the wall and mounting plate. Be careful not to touch the electrical wires together on the thermostat.
Disconnect the wiring. Carefully remove the electrical wiring from the unit and keep the wires apart. You might want to tape the bare ends and also ensure that the wires don’t fall back through the wall. If the wires are not color coded, mark each one and which terminal they were removed from. Remove the mounting plate.
If you are using a new mounting plate, make sure it fits over the existing hole and then pull the wires through the opening of the plate. Make sure the mounting plate is secured to the wall with the proper screws.
Now match the wires to the terminals on the new thermostat. The wires are usually color-coded but if not, make sure you attach the right wires to the corresponding numbered terminals on the next thermostat. A green wire, which operates the furnace fan blower, is connected to the “G” terminal. The white wire operates the heater and attaches to the “W” terminal. The yellow wire operates the air conditioner and connects to the “Y” terminal. Use a wire nut to secure the wires and keep them apart from other wires. Ignore any other wires coming out of the wall as they are not necessary and may have been added by the original builder for other purposes.
Carefully move the wires back into the wall as you line up the new thermostat on the mounting bracket. Install the new bracket and secure the thermostat to the bracket.
Turn your power back on and check your thermostat by setting the temperature high or low, to engage the furnace or air conditioner.

This simple procedure can be done in less than 10 minutes. But if you have any doubts and want greater peace of mind, call a Cape Canaveral heating and cooling contractor to perform the installation.

Tags: Cape Canaveral, Cocoa Beach, Indian River County, Suntree/Viera, thermostat
Posted in Services | Comments Off on HVAC Contractor Tip: How to Replace a Thermostat

Easy Ways to Lower My Heat Pump’s Energy Bill? A Question from Cape Canaveral

Wednesday, November 30th, 2011

One of the biggest advantages of a heat pump in your Cape Canaveral home is that it is highly efficient for both heating and cooling. There is always room for improvement, though, so here some tips to lower your energy bill even more:

Get it checked. It’s been said many times before, but it’s always worth saying again: consistent maintenance is one of the biggest keys to keeping any appliance running efficiently. Get your heat pump inspected by a professional at least once a year. This will keep it in good shape and provide an opportunity to make small repairs, before they have a chance to turn into big problems.
Keep it clean. When it comes to HVAC equipment, a clean unit is an efficient unit. Check and replace the filters regularly, according to the manufacturer’s instructions. Keep the coils and fan clean. This will also be part of the annual maintenance, but you can – and should — do touch up cleaning on your own.
Install a thermostat. A programmable thermostat is a great energy efficiency tool for any home heating and cooling system, not just a heat pump. A thermostat will keep the temperatures lower during the day or any time no one is home, so that you are not wasting heat.
Let it run. It may seem counterintuitive, but turning off a heat pump to save energy may actually do more harm than good. Heat pumps operate most efficiently when they stay running on a regular basis. The components don’t need to take time to spin up, and the refrigerant stays warm so it can keep moving. Your best bet is to have your heat pump connected to a programmable thermostat, program it and then stop thinking about it. You’ll save a bundle over manual operation.
Protect the outdoor unit. The outdoor portion of your heat pump has to put up with a lot from the elements. Strong winds can damage them or negatively impact the efficient operation of the pump, so keep the outdoor unit protected from wind.

These simple measures, in combination with a highly efficient heat pump, will help slash your energy bills. In addition, check to see if your heat pump is eligible for a federal tax credit, which can save you even more money.

Tags: Brevard County, Cape Canaveral, Eau Gallie, Energy Savings, Heat Pumps, Merritt Island
Posted in Services | Comments Off on Easy Ways to Lower My Heat Pump’s Energy Bill? A Question from Cape Canaveral

Scary Air Conditioner Problems

Friday, October 28th, 2011

Happy Halloween weekend from everyone at Next Generation Air and Heat! We hope you have a fantastically spooky time! And since we are talking about scary things, here is some information about common problems with your air conditioner.

Air conditioners are an important part of our lives in Orlando. They keep us comfortable despite overbearing heat and humidity outside, but because they run constantly for months and because they are such complicated pieces of machinery, they are prone to a number of problems. Here are some of the most common problems you’re likely to run into with an air conditioner and how to solve them:

Leaks

A common problem that many people ignore or are unaware of is refrigerant leakage. It is possible that when the system was installed, it wasn’t properly charged, but most of the time if your system is low on refrigerant, it is because of a leak. You can’t just pour more refrigerant in and call it good, though.

The leak needs to be fixed, both for health and environmental reasons. If you notice that your system is low on refrigerant or you smell something off – often like acetone, call a professional immediately for inspection and repair.

Sensors

An air conditioner doesn’t do you any good if the sensors don’t work properly. Improperly working sensors will fail to properly read the temperature in the home or from your thermostat. So, it might be 80+ degrees in your home but if the thermostat reads it as 72, the system won’t turn on. The air conditioner itself probably still works fine, but unless it can successfully read the temperature, you won’t get the cooling you need to stay comfortable.

Check first to see if the sensor was moved or knocked toward the evaporator coil (which will keep the temperature reading low).

Drainage problems

Your air conditioner acts as a dehumidifier as well, producing a liquid known as condensate. This liquid usually drains from the air conditioner into a designated area away from your home. However, if the condensate drain gets clogged or if the system wasn’t properly installed, that condensate can start to build up in your home. If you notice leakage around the coils, you may need a pump to remove the condensate properly.

Properly maintaining your air conditioner can usually be done with regular maintenance each year, but if one of these problems pops up, call a professional and get them fixed right away.

Tags: Air Conditioning Maintenance, Air Conditioning Repair, Brevard County, Cape Canaveral, Orlando, Winter Park
Posted in Services | Comments Off on Scary Air Conditioner Problems

Important Things to Remember When Installing a Central Air Conditioner: Some Pointers from Cape Canaveral

Wednesday, October 26th, 2011

A good central air conditioner is a huge upgrade for most Cape Canaveral homeowners. If you’ve been using window units for the last few years or have an older central unit that simply doesn’t get the job done any longer, a brand new central unit will feel incredible. But, before you run out and hire someone to install your new central air conditioner, there are a few things to remember.

Space – Make sure you have enough space for both the outdoor unit and the indoor evaporator coils. If space is limited, there are smaller units that will use less and still provide a decent amount of cooling.
Supply Registers – Make sure there are enough registers in your home, in the rooms where you need the cooled air. Insufficient depositing of cooled air won’t keep you cool and will run up your energy bill.
Ducting – Check the duct work and make sure it can support an air conditioning system. Seal up any ducts leading into spaces you don’t want cooled like the attic or the basement.
Condensing Unit – Clear away a space outside where your condensing unit will be placed. It should be clear of debris and be easy to maintain throughout the year, even in the winter when snow might block it in. It should also be easy to access for installation and annual maintenance.
Sizing – When you call a professional, they should properly size your home and match it to a central air conditioner that fits your needs. Something too small won’t provide the level of cooling you need and something too large will cycle on and off frequently, costing you more money and putting unnecessary stress on the machine.

If you’re ready for a central air conditioner and want to start the processor, call a professional who can help you go through each of these issues and make sure your home is ready for the new device. Once you’ve done that, you can select a model and have it installed.

Tags: Air Conditioning Installation, Cape Canaveral, Eau Gallie, Orange County, Palm Bay
Posted in Services | Comments Off on Important Things to Remember When Installing a Central Air Conditioner: Some Pointers from Cape Canaveral

Your HVAC System’s Condensate Drain Line: A Tip From Orlando

Friday, October 7th, 2011

There are a lot of components involved in your Orlando home’s properly working HVAC system. One component that many people overlook is the drain line for the air conditioning system. Your air conditioning system has condenser coils that sweat the water drawn from the air in your home as it is cooled by your AC unit. These coils produce a significant volume of water, especially when it humidity is high, so a condensate drain pan is installed to capture the moisture and keep it from damaging your home.

A drain line from the drain pain out of your home is required to transfer all that extra water, but it can easily become clogged by debris in the area or simply from heavy condensation. If this happens, the drain line might need to be cleared or even replaced.

Inspecting your Condensate Drain Line

Full inspection of your drain line involves checking quite a few components, so I will point you to Inspectapedia for a thorough rundown of what you should look for (and some pictures to show you what you don’t want to see). But, in short, you want to look for evidence that your condensate drain is overflowing or that the liquid in your drain pan is backing up into the air handler.

You may also notice that there is no liquid coming out of the condenser – a sign that there may be a major problem in the system that needs immediate inspection. If this happens, make sure you check for blockages and if nothing is present, call a contractor.

Cleaning Your Drain Line

Each year, it is recommended that you clean your drain line to make sure it is clear and ready for the summer’s heavy cooling and high humidity. The simplest way to do this is to disconnect the drain line and attach a hose to blow the line clear. This can get a little messy, so make sure you dress for the occasion. Another option if you have a wet/dry vac is to attach the hose to the end of the drain line and suck free any moisture still in there. Most wet/dry systems have attachments for drain line clearing or you can order one.

If your drain line is not clearing properly or you think there may be structural damage suffered during the winter, call a professional for a more thorough inspection.

Tags: Air Conditioning Maintenance, Cape Canaveral, Melbourne, Orlando, Titusville
Posted in Services | Comments Off on Your HVAC System’s Condensate Drain Line: A Tip From Orlando

Home Repairs You Don’t Want to Ignore in Cape Canaveral

Friday, September 16th, 2011

There are a lot of things you need to take care of around your Cape Canaveral home. But, everything costs money so many homeowners will put off certain home repairs for weeks, months or even years until they can afford them. However, there are certain things around the house you simply should not put off. Not only can they cost you more money in the long run, they can put your home and your family at risk if you wait too long.

Dirty Filters

Dirty filters in your air conditioning, heating, or air quality system are a problem. Not only do they force your HVAC system to work harder to maintain a good temperature, they are frequently a major cause of airborne contaminants and pathogens. Imagine it this way; those filters are meant to remove something from your air. If they get dirty and are not replaced or cleaned, they probably aren’t working any longer and you can get sick. Dirty filters are inexpensive and easy to fix. Both you and your HVAC repairperson should see to them regularly.

Dryer Vents

Clogged dryer vents are more than just an inconvenience – they are dangerous. If your home has dirty dryer vents, the exhaust from your dryer isn’t able to escape. When this happens, heat will build up in the ducts. Not only can exhaust backup into your home, the risk of a fire goes up significantly. Have your dryer vents cleaned at least once a year and if you live in a two or three family house, make sure it is more often – closer to every 6 months.

Flexible Gas Connectors

Gas connectors are used to transfer gas from the supply entering your home to various appliances like your stove and furnace. So, there is a lot of natural gas passing through them each day. If they are not properly cared for, that natural gas can start to leak from the connectors and eventually build up in your home to an unsafe level. You should have a carbon monoxide detector installed on every floor of your home and you should have someone come out and check your system regularly for problems.

Tags: Cape Canaveral, Home Maintenance, Palm Shores, Port St John
Posted in Services | Comments Off on Home Repairs You Don’t Want to Ignore in Cape Canaveral